Electronic thermostat-temperature controller

Description

Electronic thermostat-temperature controller, breeding temperature control switch
Item:7016c

Digital temperature controller: -50 ℃ to 110 ℃ / -58 ℉ to 230 ℉

temperature measurement and control,Display resolution of 0.1 degrees,

1 degree control resolution

Optional cooling or heating mode1-25 degree adjustable hysteresisDelay start function,

0-30 minutes adjustable

The lower range limit temperature adjustment function

Down with the data storage function,

Relay shock current 10A/220V.

Reliable operation resistive load maximum 1000W, 600W maximum inductive load

The machine maximum power consumption: less than 2W

Measurement error: less than ± 0.5 ℃

Working temperature: -20 ℃ ~ 80 ℃S

Sensor line length is 1M

2 Wiring diagram: Dual-output connection diagram

Terminals 1 and 2: Connect the cooler or heater

Terminals 1 and 3: Connect alarm

Terminals 4 and 5: Connect the power

Terminals 6 and 7: Connect temperature sensor

Lock switch: If the 1 or 2 is switched to the ON position, can lock the settled control parameters.

Single output connection diagram

Load and temperature control use the same power

Load and temperature control use the different power

Terminals 1 and 2: The output of cooling and heating.

Terminals 3 and 4: Connect the power

Terminals 5 and 6: Connect temperature sensor

Lock switch: If the 1 or 2 is switched to the ON position, can lock the settled control parameters.

Caution for using:

◆ Please connect the correct operating voltage, the machine normally works

under the standard input voltage within range of ± 10%.

◆ The load power should not exceed the maximum thermostat control power, when exceeding please connect external AC contactor.

◆ Please connect the power load correctly and the sensor, or it will damage the thermostat, when connect the wrong line .

◆ Please do not put the sensor lines and power lines in parallel, power line noise affects the accuracy of the measurement.